Product Description:

The MDD093A-N-030-N2L-110GB0 synchronous servomotor is produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts inverter output into controlled mechanical rotation for positioning and velocity tasks in automated machinery. The design corresponds to motor size 093 with the short A length code, and it ships in the manufacturer’s standard housing and balancing grade, giving installers a familiar mechanical envelope compatible with existing Rexroth mounting fixtures.

For axis selection, the continuous torque available at standstill is 9.2 Nm, so the motor can hold or slowly index a load without overheating when current remains within rated limits. During normal duty, the rotor reaches a nominal speed of 3000 rpm, matching high-speed machining or conveyor cycles driven by compatible digital drives. Mechanical integration is guided by a centering diameter of 110 mm, ensuring concentric alignment with gearboxes or flange plates. Electrical and encoder cables exit on the rear because the connection hardware is oriented toward Side B. Quick termination is achieved with a sealed connector rather than loose leads, reducing assembly time in the cabinet.

The encoder system delivers digital servo feedback, allowing the drive controller to close position loops accurately during operation. A plain shaft exits the front, and a shaft seal is installed to restrict lubricant migration and guard against dust ingress to the interior bearings. Because the motor is supplied without a blocking brake, external holding mechanisms are required if gravity loads are present. The standard shaft end configuration on side A and the lack of a shaft stub on side B leave room for couplings or belt pulleys without extra machining. Wake Industrial offers a one-year warranty on this MDD motor.