Product Description:

The Bosch Rexroth Indramat MDD093A-N-030-N2G-110GB0 is a synchronous AC motor in the MDD Synchronous Motors series. Designed for integration with digital drive controllers, it converts controlled electrical power into rotary motion for automated lines, packaging equipment, and indexing tables. Its purpose is to deliver consistent torque and speed while occupying a compact footprint, making it suitable for machinery that requires precise positioning and rapid reversals. It is commonly used on servo axes where accurate response is needed over repeated production cycles.

At standstill, the rotor supplies a continuous torque of 9.2 Nm, allowing the machine axis to hold load without thermal overload. Under normal operating conditions, the motor reaches a nominal speed of 3000 rpm, and standard balancing helps keep vibration controlled at that speed. Frame size 093 and length code A indicate the shortest housing in this family, which helps when installation space is limited. A centering diameter of 110 mm provides the pilot fit for flange mounting and helps maintain concentric alignment. Position and velocity data are returned to the drive through resolver feedback, supporting sinusoidal commutation and stable speed regulation. The output shaft is supplied as a plain shaft, so torque is transferred through frictional clamping couplings rather than a keyed connection.

The cables enter the motor on Side B, and a single multi-pole connector carries both power and signal conductors through one connection point. A factory-installed shaft seal helps prevent coolant or dust from entering the bearing cavity and supports the standard IP65 housing rating. The unit is supplied without a blocking brake, so external mechanical holding or drive torque is required when power is removed. A standard front shaft end and the absence of a rear extension shorten the overall body, while the standard housing and balancing allow installation without added vibration isolation. This arrangement keeps the motor package compact for face-mounted servo axes.