Product Description:

The MDD093A-N-020-N2M-130PA0 servo unit belongs to the MDD Synchronous Motors series and is intended for use with digital drive controllers. It is an AC permanent-magnet motor that converts command current into regulated torque and speed for indexing tables, packaging axes, and other motion tasks in automated production cells. Its internal position sensing, standard housing, and connector-based wiring simplify integration while providing rotary motion that can be synchronized with line controls. The motor uses the 093 frame format, which suits compact multi-axis installations where consistent mounting dimensions are required.

At a rated rotational speed of 2000 rpm, the motor can produce a continuous standstill torque of 9.2 Nm. This torque supports load holding and positioning tasks while the shaft is stationary. Feedback for the control loop is provided through digital servo feedback (DSF), which sends high-resolution position data to the drive. A built-in integrated multi-turn absolute encoder retains shaft position across power cycles, which removes the need for a homing move at startup. Because the unit is supplied without a blocking brake, holding torque during power-off must be supplied by an external mechanism or by drive torque when required.

The mechanical interface uses a centering diameter of 130 mm, so the flange fits standard mounting faces for this motor size. Power and feedback cables exit on Side A, allowing routing parallel to adjacent axis hardware. The output end is built with a shaft seal, which helps resist lubricant migration and dust ingress. The ground shaft uses a keyway to transmit torque to couplings or pulleys. The motor has length code A, frame size 093, a standard housing, and a single-ended shaft, which keeps the package compact while supporting digital drive operation.