Product Description:

The MDD093A-N-020-N2M-130GR2 is a synchronous servo motor in the MDD Synchronous Motors series from Bosch Rexroth Indramat. Built as a motor for digital drive controllers, it turns commanded current into precise rotation for coordinated motion axes used in automated assembly cells, material-handling stations, and packaging lines where repeatable positioning is required. Mounting is guided by a centering pilot of 130 mm, which helps keep the motor aligned with the machine flange. Length code A makes this the most compact stator option in the 093 platform.

It produces a continuous standstill torque of 9.2 Nm, so the axis can hold static loads without external clamps while the motor is energized. Under rated conditions, the rotor reaches a nominal speed of 2000 rpm, which suits medium-speed indexing or feed roles. A blocking brake provides up to 22 Nm of holding torque to secure the shaft when power is removed. Position data is returned through digital servo feedback (DSF), enabling closed-loop control with drive diagnostics. Standard dynamic balancing helps reduce residual vibration during operation and supports smoother motion on indexing axes.

The output end is a plain shaft protected by a shaft seal that limits lubricant loss and contaminant ingress. All electrical and feedback connections exit on the right side, easing cable management when multiple motors are aligned in a cabinet or gantry. The motor uses a single multi-pin electrical connector, which keeps the wiring interface compact and leaves more room around adjacent components. An integrated multi-turn absolute encoder records rotor angle across several revolutions, eliminating homing after power-up. The housing uses the standard enclosure format for this motor family.