Product Description:

The MDD093A-N-020-N2M-130GL0 is a synchronous servo motor created by Bosch Rexroth Indramat and assigned to the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts drive commands into precise mechanical motion for positioning tables, pick-and-place axes, or tooling spindles in industrial automation cells. Its integrated digital feedback and electrical characteristics allow it to be paired directly with Rexroth drive modules for closed-loop speed and position control.

During operation the unit reaches a nominal speed of 2000 rpm, providing a balance between dynamic response and long-term thermal limits. At standstill it can supply 9.2 Nm of continuous holding torque, so vertical loads can remain stationary without additional gearing. A centering pilot of 130 mm aligns the flange precisely against machine plates and transmits radial forces evenly. Position data are generated by the integrated multiturn absolute encoder, while incremental and absolute values are transmitted over digital servo feedback channels to the controller for real-time correction. The single-cable connector on the left side carries power conductors, and the standard balancing grade limits residual vibration that could propagate into adjacent mechanics.

The motor is supplied without a blocking brake, so any emergency holding function must be provided by the drive or by external clamps. A factory-installed shaft seal guards the output against lubricant ingress when the housing is mounted in IP-rated enclosures. Size code 093 identifies the frame envelope, and the A-length body keeps the overall depth compact for tight cabinets. The drive side uses a plain shaft, and the design omits a side-B extension, matching the standard shaft-end arrangement. The connection uses a molded connector, and the housing and balancing are standard.