MDD093A-N-020-N2M-130GA2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
5 Seconds
The Bosch Rexroth Indramat MDD093A-N-020-N2M-130GA2 is a synchronous motor from the MDD Synchronous Motors series with a nominal speed of 2000 RPM and a continuous torque at standstill of 9.2 Nm. It features a 130 mm centering diameter, integrated multiturn absolute encoder, and is equipped with a blocking brake providing 22 Nm of holding torque. The motor has a plain shaft with a shaft seal and uses digital servo feedback for motor feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat manufactures the MDD093A-N-020-N2M-130GA2 synchronous servo motor, a member of the MDD Synchronous Motors series. Within an automation line, this product couples directly to a digital drive controller, converting controlled current into mechanical rotation for indexers, gantry axes, and other motion-critical stations. Its design offers closed-loop performance, a compact housing, and an integrated feedback interface so that coordinated movement can be maintained without adding external transducers or gearing.
In continuous operation, the rotor reaches a nominal speed of 2000 rpm, indicating the rotation rate obtainable under rated voltage and load. During standstill, the stator can deliver 9.2 Nm of continuous torque, a value used when sizing vertical axes that must support weight without thermal overload. All power and feedback leads leave the motor on Side A of the frame, simplifying cable routing when the unit is mounted inside compact enclosures. Mechanical centering is provided by a 130 mm pilot diameter that aligns the flange with gearboxes or bell housings, reducing radial runout. A keyed connector interface allows rapid exchange without disturbing pre-installed cabling.
Position information is supplied by an integrated multi-turn absolute encoder, and that signal is returned as digital servo feedback (DSF) so the drive can execute high-bandwidth position and velocity loops. A blocking brake is included and can apply 22 Nm of holding torque to secure loads whenever the drive is disabled. The output end uses a plain shaft with a shaft seal to couple directly with clamping sleeves or backlash-free couplings while limiting lubricant ingress. The standard dynamic balancing grade and standard housing finish keep vibration and mounting dimensions consistent with other size-093 units in the series.
Frequently Asked Questions about MDD093A-N-020-N2M-130GA2:
Q: What type of encoder is included with the MDD093A-N-020-N2M-130GA2 motor?
A: This motor is equipped with an integrated multiturn absolute encoder.
Q: What is the holding brake torque of the MDD093A-N-020-N2M-130GA2?
A: The holding brake on this model provides a torque of 22 Nm for secure holding.
Q: What is the nominal speed of the MDD093A-N-020-N2M-130GA2 synchronous motor?
A: The nominal speed of this motor is rated at 2000 min⁻¹.
Q: What type of motor feedback does the MDD093A-N-020-N2M-130GA2 use?
A: This model features digital servo feedback (DSF) for precise position monitoring.
Q: What kind of shaft and protection does the MDD093A-N-020-N2M-130GA2 motor offer?
A: A plain shaft with a shaft seal is provided to help protect against dust and contaminants.
