Product Description:

The MDD093A-N-020-N2M-110PR2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat in the MDD Synchronous Motors series. It is intended for direct connection to digital drive controllers, where it converts commanded current into precise rotary motion for positioning and feed tasks in industrial automation cells. Its internal feedback interface supports closed-loop control, allowing production lines, handling modules, and packaging stations to keep axes synchronized with repeatable accuracy under varying mechanical loads.

The motor provides a continuous standstill torque of 9.2 Nm, allowing it to resist load at zero speed without exceeding temperature limits. Its rated speed reaches 2000 rpm, which supports synchronous operation with accurate position control. If power is removed, an internal brake provides 22 Nm of holding torque to immobilize the shaft and support suspended loads. Position information is generated by an integrated multi-turn absolute encoder, which tracks shaft angle across multiple revolutions so the system can resume operation without a homing cycle. This data is transmitted through digital servo feedback (DSF), giving the controller the resolution needed for precise current and speed regulation during rapid load changes.

A centering flange diameter of 110 mm aligns the motor accurately within machine frames, and all terminations exit on the right side so cables can follow existing service channels. Power and feedback lines attach through a durable connector, preserving shielding integrity and supporting secure cable routing. The rotor uses a keyway shaft for connection to standard hubs, and a shaft seal helps limit lubricant escape and particle ingress. Standard balancing reduces vibration during acceleration, and the housing uses the 093 size envelope for common machine layouts.