Product Description:

The MDD093A-N-020-N2M-110PR0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and included in the MDD Synchronous Motors series. Designed for use with digital drive controllers, it provides rotary actuation in automated machinery that depends on closed-loop motion accuracy, repeatable positioning, and stable speed regulation during changing load conditions. The unit pairs with compatible drives in production lines, packaging systems, and material-handling stations, converting electrical energy into controlled torque and speed for indexing axes, feed mechanisms, transfer units, and other precision motion tasks in packaging, assembly, and conveying processes.

With a continuous standstill torque of 9.2 Nm, the motor can hold load at zero speed during short dwell periods without excessive thermal stress. The nominal operating speed is 2000 rpm, which suits applications that need moderate shaft velocity with stable feedback performance. Mounting is assisted by a centering diameter of 110 mm, helping the housing seat accurately against the machine interface. Power and feedback conductors exit on the right side through a sealed connector, which keeps cable routing orderly in compact enclosures. Rotor balance follows the standard grade, and size code 093 with length code A gives the motor a compact body for limited installation space.

Position data is delivered by an integrated multi-turn absolute encoder, and control loops operate through the digital servo feedback (DSF) channel used by the drive. The feedback arrangement allows the controller to monitor rotor position continuously during motion and at standstill. The motor is supplied without a blocking brake, so an external holding device is needed when the axis must remain fixed after power removal. The output shaft uses a keyway configuration and includes a shaft seal, while the omission of a side B extension reduces rear overhung mass and shortens the back end of the motor.