Product Description:

The MDD093A-N-020-N2M-110PL0 is a servo motor manufactured by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. As a motor for digital drive controllers, it serves as the rotary actuator in automated axes that require accurate positioning and repeatable speed. The design uses the A length code and size 093 frame, so it fits machinery that is already arranged for this family footprint. It is balanced to the standard grade and is supplied without a blocking brake, which keeps the rotating system simple for applications that do not require mechanical holding at standstill. This makes it suitable for feed axes and other servo tasks where smooth response is more important than built-in load holding.

At the mechanical interface, the centering diameter measures 110 mm, and the power and feedback connectors have a left-side orientation, which helps keep cable routing consistent inside the machine. A sealed connector housing carries both motor phases and sensor leads while maintaining the enclosure protection level. During continuous stall conditions, the motor can deliver 9.2 Nm of torque, which is suitable for holding moderate loads without movement. Its rated operating point is 2000 rpm, a speed that suits many machine-tool and transfer-line applications and can support direct coupling where gear reduction is not required.

Signal accuracy is supported by an integrated multi-turn absolute encoder, and the drive processes those signals through digital servo feedback (DSF) rather than an external resolver. A shaft seal helps protect the bearing set from coolant and dust during normal industrial use. The output uses a shaft with a keyway, which simplifies hub alignment when couplings are mounted. Because the housing follows the standard MDD profile and the shaft end is only on the drive side, the motor can be installed in tight assemblies without requiring extra clearance behind the unit.