Product Description:

The MDD093A-N-020-N2M-110PA0 is a synchronous servo motor produced by Bosch Rexroth Indramat for use with digital drive controllers in automated machinery. As part of the MDD Synchronous Motors series, it converts electrical input into controlled rotary motion for indexing tables, gantry axes, and packaging equipment. The size 093 housing is supplied in a standard build, and the motor uses standard balancing for direct coupling in general automation duties. The servo design allows the controller to adjust torque output quickly during acceleration, deceleration, and dwell periods in cyclic production equipment.

Its continuous standstill torque is 9.2 Nm, which indicates the thermal load the motor can hold at zero speed. The rotor has a nominal speed of 2000 rpm, which suits general-purpose positioning tasks that need moderate velocity without pushing the motor into a high-speed range. Accurate alignment is supported by the 110 mm centering diameter, and power and feedback leads exit on Side A through a circular connector. A shaft seal helps keep contaminants away from internal components, while the integrated multi-turn absolute encoder provides position data across multiple revolutions after power is restored.

The motor is supplied without a blocking brake, so any holding function must come from the drive or from external mechanical restraint. Motion control uses digital servo feedback, which supports closed-loop regulation for position and speed during dynamic machine cycles. The compact housing is identified by Motor Length Code A, and the motor also uses a standard housing, a keyway shaft, and a single-ended shaft arrangement. These features give the unit conventional mechanical interfaces for direct machine mounting while keeping the overall body short for installations with limited axial space.