Product Description:

The MDD093A-N-020-N2M-110GL2 is a synchronous servo motor produced by Bosch Rexroth Indramat and assigned to the MDD Synchronous Motors series. Designed to interface with digital drive controllers, the unit converts commanded current into rotary motion for positioning axes in industrial automation lines. By supplying rated torque at low speed and working with high-resolution feedback devices, it supports repeatable indexing, conveying, and tooling functions where consistent motion sequences are required.

At standstill, the motor can deliver a continuous torque of 9.2 Nm, a value that indicates the load it can hold indefinitely without overheating. Once energized, it reaches a nominal speed of 2000 rpm, so gear ratios can be selected around that base velocity for efficient operation. The centering diameter of 110 mm aligns the flange with adjoining machinery and helps maintain concentricity during mounting. Power and feedback conductors exit on the left side, simplifying cabinet routing when the installation space requires that orientation. For emergency stops, a blocking brake provides 22 Nm of static holding capacity, preventing back-driving of vertical axes during power loss.

Rotor position is monitored through Digital servo feedback (DSF), which streams real-time position data from the integrated multi-turn absolute encoder to the controller for closed-loop regulation. Mechanical output is transferred through a plain shaft that accepts user-selected couplings, while an internal connector set shortens installation time by eliminating open lead wiring. Standard balancing and housing grades minimize vibration and ease thermal transfer, and the shaft seal keeps lubricants inside the bearing chamber. With size code 093 and the compact length code A, this motor fits tight equipment frames.