MDD093A-N-020-N2M-110GL1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
9 Seconds
The Bosch Rexroth Indramat MDD093A-N-020-N2M-110GL1 is part of the MDD Synchronous Motors series and is designed for digital drive controllers. This motor has a nominal speed of 2000 revolutions per minute and delivers a continuous torque of 9.2 Newton meters at standstill. It features an integrated multiturn absolute encoder, a holding brake with a torque of 11 Newton meters, and includes a plain shaft with a 110 mm centering diameter.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093A-N-020-N2M-110GL1 synchronous servo motor is produced by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Designed for integration with digital drive controllers, it converts electrical power into controlled rotary motion for positioning axes in industrial automation. Because it is intended for closed-loop servo operation, the motor supports accurate speed and position control when paired with a compatible controller. That makes it suitable for indexing, feed, and handling applications that require repeatable motion rather than unmanaged rotation. The motor belongs to size 093 with the short length code A, and its standard housing and balancing suit machine layouts that need a compact motor with predictable running characteristics.
At standstill, the rotor can deliver a continuous torque of 9.2 Nm, allowing the axis to hold a steady load during low-speed or stationary operation. During emergency stops or power-down events, the integrated blocking brake supplies 11 Nm of holding torque to secure the axis. The motor uses a centering diameter of 110 mm as the mounting pilot for flange installation. Rated operation is achieved at 2000 rpm, which suits moderate-speed servo tasks such as conveyors, feed units, and tooling axes. Electrical power and feedback signals are connected through a connector, and a shaft seal protects the front bearing area from dust and coolant.
The power and feedback leads exit on the left, which can help when cable space is limited on one side of the machine. Position data is supplied by an integrated multiturn absolute encoder, so the controller can retain shaft position information across multiple revolutions. The feedback system uses digital servo feedback (DSF) to transmit high-resolution signals for stable velocity and position control. The motor has a plain shaft on side A only, leaving the rear of the housing free of a second shaft extension. This single-ended arrangement supports direct coupling to driven elements while keeping the non-drive end compact.
Frequently Asked Questions about MDD093A-N-020-N2M-110GL1:
Q: What type of encoder is integrated in the MDD093A-N-020-N2M-110GL1 motor?
A: This model comes equipped with an integrated multiturn absolute encoder for precise position control.
Q: What is the continuous standstill torque for the MDD093A-N-020-N2M-110GL1?
A: The continuous torque at standstill for this motor is rated at 9.2 Nm.
Q: Does the MDD093A-N-020-N2M-110GL1 have a holding brake?
A: A blocking brake offering a holding torque of 11 Nm is included with this unit.
Q: What is the nominal speed of the MDD093A-N-020-N2M-110GL1 motor?
A: The nominal speed for this motor is specified at 2000 min⁻¹.
Q: What is the connection type and orientation for the MDD093A-N-020-N2M-110GL1?
A: The MDD093A-N-020-N2M-110GL1 uses a connector type for its electrical connection, oriented to the left.
