Product Description:

The Bosch Rexroth Indramat MDD093A-N-020-N2M-110GB0 is a synchronous servo motor in the MDD Synchronous Motors series for digital drive controllers. Within an automation cell, it converts commanded current into repeatable rotary motion for gantries, transfer lines, and machine-tool axes. Its integrated sensing supports accurate velocity and position control during changing loads and repeated cycle operation. That makes it suitable for indexing, feed, and transfer duties where repeatability is important across frequent start-stop cycles.

Performance includes a continuous standstill torque of 9.2 Nm, allowing the axis to hold load at zero speed when the drive supplies current. When rotation is required, the shaft reaches a nominal speed of 2000 rpm, matching common servo gearing and voltage ranges. A centering diameter of 110 mm keeps the motor aligned with adjoining machine faces, while the connections exit on side B to keep cabling away from the working end. Power and feedback are routed through a connector, which keeps the interface compact and organized. Inside the housing, an integrated multi-turn absolute encoder works with Digital servo feedback (DSF), so the controller retains precise rotor-position information after power cycling and can regulate motion without losing position data.

The motor uses a plain shaft for coupling to external transmission elements, and it is built with a shaft seal to help protect the front bearing from coolant and dust. It is supplied without a blocking brake, so any static holding function must come from the drive or an external clamp. Rotor balance is set to standard balancing, which supports smooth operation with common flexible couplings and helps limit vibration during normal running. The single-ended shaft arrangement leaves no extension on side B, which reduces protruding hardware at the cable end and keeps the rear of the motor less crowded during installation.