MDD093A-N-020-N2L-130PL2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
27 Seconds
The Bosch Rexroth Indramat MDD093A-N-020-N2L-130PL2 is a motor designed for digital drive controllers and is part of the MDD Synchronous Motors series. It features a holding brake with a torque of 22 Nm, a continuous torque at standstill of 9.2 Nm, and a nominal speed of 2000 revolutions per minute. The motor includes digital servo feedback, a 130 mm centering diameter, and a keyway shaft type with a standard shaft seal.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093A-N-020-N2L-130PL2 is an AC synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is intended for use with digital drive controllers, converting commanded current into precise rotational motion for positioning tables, feed axes, and similar automation tasks. The design supports closed-loop motion control in machinery that depends on accurate starts, stops, and stable speed regulation. Because the motor works with a digital controller, current, speed, and position corrections can be applied quickly as the load changes during motion.
At standstill, the rotor delivers a continuous torque of 9.2 Nm, permitting the axis to hold medium loads without exceeding thermal limits. During regular duty, the shaft reaches a nominal speed of 2000 rpm, which aligns with drives that supply the matching electrical frequency. Accurate mounting is supported by a centering diameter of 130 mm on the motor flange, helping maintain concentric alignment with the machine frame. Position data is returned to the controller through Digital servo feedback (DSF), enabling closed-loop regulation of speed and position. This feedback arrangement allows the drive to monitor rotor position continuously during acceleration, deceleration, and holding operation. The motor has a frame size of 093, which corresponds to the stator diameter and magnetic package used for this housing.
A spring-applied holding brake rated at 22 Nm secures the load whenever power is removed, preventing uncommanded motion on vertical or lifting axes. All electrical connections exit on the left side, which can simplify cable routing when drives are mounted side by side. A shielded circular connector is preinstalled, helping preserve EMC performance and keeping the electrical interface compact. The housing is supplied with a shaft seal, which helps block coolant or lubricant migration along the keyed shaft. Standard rotor balancing keeps vibration low, and the keyway shaft supports direct coupling to gears, pulleys, or rigid couplings in industrial machinery. This layout is useful in compact machine sections where cable bends must be kept clear of adjacent components.
Frequently Asked Questions about MDD093A-N-020-N2L-130PL2:
Q: What type of motor feedback does the MDD093A-N-020-N2L-130PL2 use?
A: The MDD093A-N-020-N2L-130PL2 supports digital servo feedback (DSF) for accurate position control.
Q: Does the MDD093A-N-020-N2L-130PL2 include a holding brake?
A: This motor is equipped with a blocking brake that provides holding brake torque of 22 Nm.
Q: What is the nominal speed of the MDD093A-N-020-N2L-130PL2 motor?
A: The nominal speed of this model is rated at 2000 min⁻¹.
Q: What shaft configuration does the MDD093A-N-020-N2L-130PL2 have?
A: The motor features a shaft with a keyway and is fitted with a shaft seal for added protection.
Q: What is the centering diameter of the MDD093A-N-020-N2L-130PL2 motor?
A: This model has a centering diameter of 130 mm, ensuring proper alignment during installation.
