Product Description:

The MDD093A-N-020-N2L-130PA0 is a synchronous servo motor built by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Designed for pairing with digital drive controllers, it converts commanded current into precise rotary motion for packaging, material-handling, and general positioning equipment used throughout automated production cells. Closed-loop regulation is achieved through integrated digital servo feedback, giving the controller high-resolution position data during operation. Its synchronous design also supports accurate response to commanded torque and speed changes, which suits indexing, transfer, and feed applications. That control behavior helps the axis maintain repeatable motion during frequent starts, stops, and reversals.

A centering diameter of 130 mm positions the housing accurately against the machine interface and helps the motor seat squarely on the mounting surface. At standstill, the rotor can deliver a continuous torque of 9.2 Nm, providing static load support without thermal overstress. During normal operation, the shaft reaches a nominal speed of 2000 rpm, which suits moderate-speed axes. Power and feedback conductors exit on Side A, which can simplify cable routing when the motor is mounted in line with gearboxes or belt pulleys. This combination supports applications that need steady holding capability at zero speed and consistent running performance once the axis accelerates.

It is supplied with a shaft seal that keeps grease inside the front bearing and helps protect the interior from coolant spray. Frame size 093 matches the keyed shaft profile, and the short A motor length keeps overall depth compact. Because the design is without a blocking brake, holding functions must be handled by the drive or an external clamp. Electrical terminations use a single inline connector, so installation does not require hard-wired glands. The rear side is closed because the model omits a side B shaft end, and the keyed output supports straightforward coupling to driven machine elements.