MDD093A-N-020-N2L-130GL2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
57 Seconds
The Bosch Rexroth Indramat MDD093A-N-020-N2L-130GL2 is a motor for digital drive controllers and is part of the MDD Synchronous Motors series. It features a continuous torque at standstill of 9.2 Nm with a nominal speed of 2000 rpm and has a holding brake torque of 22 Nm. The motor offers digital servo feedback, a plain shaft with shaft seal, and a centering diameter of 130 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093A-N-020-N2L-130GL2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is intended for operation with digital drive controllers where precise velocity and position control are required in industrial automation. The unit provides rotary motion to actuators, material-handling axes, or machine tool spindles while maintaining feedback compatibility with common Rexroth drive platforms. This makes it suitable for applications that require accurate closed-loop motion and consistent response to changing loads.
The motor has a nominal speed of 2000 rpm, which gives the drive a rated operating point for speed-controlled applications. A continuous standstill torque of 9.2 Nm allows it to hold static loads, and the integrated blocking brake can resist up to 22 Nm when power is removed to help prevent unintended movement on vertical axes. A centering diameter of 130 mm helps align the housing with the mounting face and reduce radial misalignment during installation. Position information is provided through digital servo feedback, which supports closed-loop regulation of torque and speed. Cables are routed on the left side to suit layouts that place the power and feedback connections on that face of the housing.
The rotor uses standard balancing to help limit vibration at higher speeds. The motor has a plain shaft, which is suited for clamp hubs or other friction-locked couplings. A factory-installed shaft seal helps protect the interior bearings from coolant splash and fine dust. The motor has frame length code A, giving it the most compact body in the 093 size and helping keep inertia low for quick acceleration. The housing uses the standard enclosure style, and a single plug-in connector keeps the electrical connection compact.
Frequently Asked Questions about MDD093A-N-020-N2L-130GL2:
Q: Does the MDD093A-N-020-N2L-130GL2 motor have a holding brake and what is its torque?
A: The MDD093A-N-020-N2L-130GL2 is equipped with a blocking brake offering a holding brake torque of 22 Nm.
Q: What is the continuous torque at standstill for the MDD093A-N-020-N2L-130GL2?
A: This motor provides a continuous torque of 9.2 Nm at standstill, supporting reliable torque delivery during operation.
Q: What type of motor feedback does the MDD093A-N-020-N2L-130GL2 use?
A: Digital servo feedback (DSF) is used for motor feedback in this model for accurate position detection.
Q: What is the connection direction and type on the MDD093A-N-020-N2L-130GL2 motor?
A: The connection on the MDD093A-N-020-N2L-130GL2 is a left-facing connector for electrical interfacing.
Q: What shaft type and configuration does the MDD093A-N-020-N2L-130GL2 motor have?
A: This model features a plain shaft with a shaft seal and does not have a side B shaft end.
