Product Description:

The MDD093A-N-020-N2L-110PL2 is an AC synchronous servo motor built by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended to drive machine axes through a digital drive controller, delivering precise position and speed control in packaging lines, material-handling stations, and general automation. As a motor designed for closed-loop applications, it converts electrical energy from the inverter into mechanical rotation while reporting its actual shaft position back to the controller. This combination supports coordinated multi-axis motion in equipment that must follow repeatable profiles.

The motor’s centering pilot measures 110 mm, providing accurate concentric alignment with gearboxes or mounting flanges. Power and feedback conductors exit on the left side through a sealed connector interface, simplifying cable routing in tight control cabinets. At standstill, it can deliver a continuous torque of 9.2 Nm, which the windings can sustain without extra cooling. During normal operation, the rotor reaches a nominal speed of 2000 rpm, enabling medium-speed positioning tasks for indexing tables and transfer systems. Position feedback is supplied by digital servo feedback, allowing the drive to close high-resolution velocity and position loops. This section also includes a connector-based power terminal, a standard housing, and standard balancing to minimize vibration.

A factory-mounted blocking brake supplies 22 Nm of holding torque, so vertical axes remain locked when power is removed. The shaft uses a keyway for positive mechanical coupling, and the front bearing region is protected by a shaft seal to limit lubricant leakage and particle ingress. The active magnetic stack follows code A, which keeps the overall length and mass modest for compact machines. The motor also uses a standard shaft end without a side-B extension and a 093 frame size that matches the series mounting pattern.