Product Description:

The MDD093A-N-020-N2L-110PL1 is a three-phase permanent-magnet synchronous motor manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Engineered as a motor for digital drive controllers, it converts drive currents into controlled mechanical rotation for positioning, indexing, and coordinated speed profiles inside automated production lines. The unit is built on a standard housing and shaft layout so it can be mounted directly and linked to servo amplifiers without custom mechanical adapters.

Its nominal speed is 2000 rpm, meaning the rotor can complete 2000 revolutions each minute under rated voltage and load. At standstill, the continuous torque reaches 9.2 Nm, allowing the axis to maintain force against static loads without thermal derating. A centering diameter of 110 mm aligns the standard housing with precision locating shoulders in the machine frame. Electrical power, feedback, and brake lines terminate in a single connector that exits to the left, which simplifies cable routing on multi-axis gantries. Torque is transmitted through a shaft that uses a keyway, providing positive engagement with couplings. The rotor is produced with standard balancing to keep residual vibration within servo-class limits.

An integrated blocking brake supplies 11 Nm of holding torque so vertical or safety-critical axes remain fixed when power is removed. Rotor position data travels over digital servo feedback (DSF), supporting high-resolution commutation and adaptive current control in the drive. A fitted shaft seal guards the bearing set against dust and oil splash from adjoining gearboxes. The motor occupies size code 093 with length code A and is delivered without a side B shaft end to reduce envelope depth. This layout helps the motor fit installations where rear clearance is limited.