Product Description:

The MDD093A-N-020-N2L-110PL0 is a three-phase synchronous motor developed by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Intended for coupling with digital drive controllers, the unit turns electrical commands into precise rotary motion for positioning axes, conveyor sections, or tooling spindles in automated machinery across packaging, printing, and material-handling lines. Its synchronous design supports repeatable motion where stable torque and accurate feedback are needed during indexing and continuous operation.

The motor delivers a continuous standstill torque of 9.2 Nm, allowing stable load support without overheating. Its nominal speed reaches 2000 rpm, so speed loops can be tuned for moderate-velocity tasks that still require tight tracking. A centering diameter of 110 mm provides the pilot fit for flange mounting and helps keep runout low. The integrated Digital servo feedback (DSF) transmitter returns high-resolution position data to the controller for accurate closed-loop control. Shaft power is transmitted through a keyway profile that mates directly with keyed couplings. Rotor balance remains within the standard grade to minimize residual vibration in typical machine frames. Motor length code A shortens overall depth, which helps where installation space is limited.

Electrical and service interfaces exit on the left and use a compact connector system, which helps keep cable routing orderly at the motor end. Frame size 093 corresponds to the stator diameter and aligns the unit with matching gearheads. The shaft is supplied with a shaft seal, which blocks coolant splash or fine dust from migrating along the shaft bore. The motor comes without a blocking brake, so vertical loads must be held by external clamping or by static torque from the drive. Its shaft end is the standard single-sided type, and the housing has a standard finish.