Product Description:

The MDD093A-N-020-N2L-110PB0 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it is used on machinery axes where closed-loop control is needed to maintain accurate speed, torque, and position. When paired with a compatible drive, the motor supports steady low-speed torque and fast response during acceleration. This makes it suitable for automated equipment such as feed axes, transfer tables, packaging mechanisms, and other motion systems that require repeatable rotary movement.

At its nominal speed of 2000 rpm, the motor can sustain a continuous standstill torque of 9.2 Nm, which indicates the available static load-holding capability without forced cooling. Mechanical alignment during installation is guided by the 110 mm centering diameter, which matches the corresponding pilot on standard flange mounts. Power and feedback leads exit on side B, which helps keep cable routing consistent in compact multi-axis layouts. An integrated connector interface replaces loose pigtails, reducing exposed wiring and helping maintain reliable electrical contact under normal machine vibration.

The motor uses digital servo feedback (DSF), allowing the controller to read rotor position and adjust current loops during operation. For applications that depend on a mechanical holding function, this model is supplied without a blocking brake, so any load retention during power-off conditions must be handled externally. The output shaft uses a keyway profile for positive torque transmission to couplings or pulleys, and a fitted shaft seal helps keep lubricant inside the housing while limiting the entry of dust or splash. Standard dynamic balancing, the A-length stator, and the 093 frame size support use in installations where compact dimensions and stable rotary performance are both required.