Product Description:

The MDD093A-N-020-N2L-110PA2 is a synchronous motor manufactured by Bosch Rexroth Indramat and supplied within the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts electrical commands into controlled mechanical rotation for industrial automation axes. The unit belongs to size 093 with length code A, a combination that sets the stator stack height and overall body length for compact installations that still require moderate torque. Its shaft end follows the standard pattern without a secondary end on side B, which supports direct coupling to driven machinery and keeps the mechanical layout straightforward.

At standstill, the motor can deliver 9.2 Nm of continuous torque, providing steady holding force for loads that require precise positioning. During power-off conditions, a blocking brake integrated into the housing applies 22 Nm of mechanical torque to lock the shaft. The shaft reaches a nominal speed of 2000 rpm, matching drive systems that operate at moderate speed while maintaining accurate motion control. Motion information is returned through Digital servo feedback (DSF), allowing the controller to monitor rotor position during operation. Power and feedback conductors exit on Side A, so cable routing can be arranged to suit that connection direction.

The front-flange centering diameter is 110 mm, which aligns the motor accurately on machine faces built to ISO dimensions. Electrical interfaces use a connector, providing a clean and secure cable connection at the motor. The output shaft uses a keyway so torque can be transferred to pulleys or couplings without slip during operation. A shaft seal is fitted to help restrict coolant or dust ingress along the journal. Standard balancing and a standard housing provide predictable vibration behavior while keeping the motor compatible with common mounting patterns.