Product Description:

The MDD093A-N-020-N2L-110PA1 belongs to the MDD Synchronous Motors series produced by Bosch Rexroth Indramat. It is a motor for digital drive controllers that converts commanded current into controlled rotation for positioning and velocity tasks in industrial automation. The unit is built on the 093 frame with the short length code A, uses a connector interface for power and feedback, and is supplied in a standard housing. The connector layout keeps power and feedback connections grouped at the motor housing rather than using separate terminal wiring. It is intended for closed-loop machine axes where the drive regulates torque, speed, and position during repetitive motion cycles. This arrangement suits packaging equipment, handling systems, and other automated machinery that requires repeatable axis motion.

The stator-housing interface is machined to a centering diameter of 110 mm, so the motor can be mounted to a gearbox or flange without radial misalignment. At standstill, it can deliver 9.2 Nm of continuous torque for static loads such as presses or index tables. At rated excitation, the rotor reaches a nominal speed of 2000 rpm, supporting moderate process velocities. A blocking brake inside the end bell produces 11 Nm of holding torque to secure vertical axes during power loss, and position information is returned through digital servo feedback for closed-loop control.

Electrical and signal conductors are routed toward the drive because the connectors sit on Side A of the frame. The output end is supplied with a shaft seal, which helps limit the entry of oil and dust at the shaft. The rotor uses standard balancing for smooth operation across its speed range, and torque is transferred through a shaft with a keyway. A single shaft end is provided, and side B remains closed to support compact installations.