Product Description:

The MDD093A-N-020-N2L-110GL1 is a synchronous motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for integration with digital drive controllers, the unit supplies controlled torque and speed to automated machinery such as gantries, handling modules, and printing axes. With a motor size of 093 and compact length code A, it fits into tight machine bays while remaining suitable for axes that need precise rotary motion. The motor is intended for closed-loop operation, so the connected controller can regulate acceleration, deceleration, and holding behavior with consistent response during repeated machine cycles.

Its rotor delivers a continuous standstill torque of 9.2 Nm, allowing static load holding without overheating during normal operation. During power-off conditions, the integrated blocking brake applies 11 Nm so suspended loads remain fixed when external motion is removed. At rated operation, the shaft reaches a nominal speed of 2000 rpm, which suits medium-speed positioning and transfer tasks. Precise velocity feedback is provided by built-in digital servo feedback, enabling closed-loop operation with the drive and accurate response to command changes. The feedback channel allows the drive to monitor rotor movement continuously rather than relying on open-loop control.

A centering diameter of 110 mm supports concentric mounting to machine interfaces, and the plain shaft transfers torque directly to couplings. A shaft seal protects the front bearing from coolant splash, while the standard housing finish tolerates typical factory humidity. Power and feedback conductors terminate in a connector on the left side of the stator, which keeps the electrical connection grouped on one side of the motor. The shaft end is supplied without a side B extension, and the standard housing encloses the winding set without forced ventilation.