Product Description:

The MDD093A-N-020-N2L-110GL0 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is designed for use with digital drive controllers, delivering position-controlled rotary power to packaging stations, handling axes, and other automated assemblies that depend on accurate speed and torque regulation. Its synchronous construction supports repeatable response during starting, stopping, and speed changes, which is useful in machines that require steady motion control over repeated cycles.

This model supplies a continuous standstill torque of 9.2 Nm, giving the drive enough reserve to hold static loads during dwell periods without overheating. During motion, the rotor can reach a nominal mechanical velocity of 2000 rpm, which matches common operating ranges for industrial servo systems. The motor uses frame size 093, which corresponds to the housing size used for this stator platform. Position and velocity loops are closed through integrated digital servo feedback, allowing the controller to read motor position directly from the encoder. A centering pilot of 110 mm on the flange helps align the motor accurately with gearboxes or machine sidewalls and reduces shaft misalignment at the mounting face.

The motor is supplied without a blocking brake, so holding force must be provided by the drive or by an external clamp when power is removed. Power and feedback leads exit on the left side of the housing, which can simplify cable routing when multiple axes are mounted in the same machine section. The output uses a plain shaft with no side-B extension, making it suitable for standard clamping hubs and similar couplings. The shaft is fitted with a shaft seal to help limit the entry of dust or coolant in demanding industrial environments. Standard dynamic balancing and the compact A length keep the motor suitable for installations where moderate mass and stable running are important.