Product Description:

The MDD093A-N-020-N2L-110GB0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Supplied for use with digital drive controllers, it converts commanded current into controlled shaft torque for positioning tables, feed drives, and other automated stations. The motor is intended for closed-loop motion tasks where stable speed response and accurate positioning are required during repeated machine cycles. Its compact housing supports use in machine tools and material-handling systems where installation space is limited.

Its centering pilot measures 110 mm, providing a common reference surface that aligns the motor face with gearbox or machine mounting features. Under continuous stall conditions, the unit generates 9.2 Nm of torque, which supports static load holding without motion. At a commanded speed of 2000 rpm, the electromagnetic design balances torque production with the thermal capability of the standard housing. Power and feedback conductors exit on side B of the stator, and the single-piece connector keeps cable attachment straightforward. Standard balancing helps reduce vibration during operation, and the compact frame suits installations where adjacent components leave little room around the motor body.

Control precision is enhanced by the integrated digital servo feedback system, which sends position data to the controller for closed-loop regulation. A ground, case-hardened plain shaft transmits torque directly to couplings, supporting direct connection to the driven load. Contamination is kept out of the front bearing by running surfaces that work with a shaft seal, helping protect the bearing area in routine industrial service. Because the motor is supplied without a blocking brake, any holding force during power loss must be provided by an external clamp or by drive-controlled torque. The shaft end remains standard without an auxiliary output on side B, which leaves clearance for couplings mounted close to the motor face.