MDD090C-N-040-N2M-110PB1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911278653
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
10 Seconds
The Bosch Rexroth Indramat MDD090C-N-040-N2M-110PB1 is part of the MDD Synchronous Motors series and is a motor designed for digital drive controllers. It features a continuous torque at standstill of 10.4 Nm with a nominal speed of 4000 min-1, and includes an integrated multiturn absolute encoder and digital servo feedback. The motor has a 110 mm centering diameter, a shaft with keyway and seal, and comes with a blocking brake providing 6.5 Nm of holding torque.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD090C-N-040-N2M-110PB1 is a permanent-magnet synchronous motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended to work with digital drive controllers and converts commanded current into rotary motion for position and velocity control in packaging machines, pick-and-place axes, and other automated stations. The permanent-magnet rotor and integrated stator windings support responsive torque delivery during repeated starts, stops, and speed changes. Its built-in feedback channel allows the drive to monitor motor behavior in real time so motion remains controlled under changing load conditions.
A centering diameter of 110 mm aligns the flange with the machine frame for accurate mounting. Continuous stall torque reaches 10.4 Nm, allowing the motor to hold load at standstill without excessive heat buildup during rated operation. The rotor can run at a nominal speed of 4000 rpm, which suits fast cyclic motion in automated equipment. A blocking brake rated at 6.5 Nm secures the shaft when power is removed. The housing uses length code C in the 090 frame size, giving the motor a standard body length with enough surface area for natural convection. A shaft seal helps limit lubricant migration, and the shaft end is supplied in a standard single-sided form for conventional coupling arrangements.
Power and feedback interfaces are placed at the rear, where the cables exit on Side B through a keyed connector. This rear connection layout keeps both cable sets in the same general direction and supports orderly routing in compact machine spaces. Position tracking is handled by an integrated multiturn absolute encoder that works with the drive’s Digital servo feedback (DSF) channel for commutation and closed-loop control. The multiturn design allows the drive to retain position information across multiple revolutions instead of reporting only a single turn. Torque is transmitted through a shaft with a keyway, which provides a positive mechanical connection to compatible hubs and couplings.
Frequently Asked Questions about MDD090C-N-040-N2M-110PB1:
Q: What type of encoder is integrated in the MDD090C-N-040-N2M-110PB1 motor?
A: The MDD090C-N-040-N2M-110PB1 features an integrated multiturn absolute encoder for reliable position feedback.
Q: What is the continuous torque at standstill for the MDD090C-N-040-N2M-110PB1?
A: This motor provides a continuous torque at standstill of 10.4 Nm.
Q: What is the holding brake torque of the MDD090C-N-040-N2M-110PB1 motor?
A: The MDD090C-N-040-N2M-110PB1 is equipped with a blocking brake that delivers a holding brake torque of 6.5 Nm.
Q: What is the connection location and type for the MDD090C-N-040-N2M-110PB1 motor?
A: On this model, the connection is made via a connector located on Side B.
Q: What type of shaft and sealing does the MDD090C-N-040-N2M-110PB1 offer?
A: The motor shaft has a keyway design and includes a shaft seal for additional protection.
