MDD090C-N-040-N2M-110GL1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD090C-N-040-N2M-110GL1 is a motor for digital drive controllers and is part of the MDD Synchronous Motors series. It features a continuous torque at standstill of 10.4 Nm with a nominal speed of 4000 rpm. The motor includes an integrated multiturn absolute encoder, a blocking brake with a holding brake torque of 6.5 Nm, and a plain shaft with a shaft seal.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Bosch Rexroth Indramat MDD090C-N-040-N2M-110GL1 is a synchronous servo motor in the MDD Synchronous Motors series for use with digital drive controllers in automated machinery. It provides closed-loop rotary motion for packaging, printing, and handling axes where accurate speed and position control are required. The motor combines a low-inertia rotor with an integrated position sensor so the controller can regulate velocity and angular position precisely during changing load conditions. It mounts directly to machine frames and uses a single plug-in electrical interface, which helps keep installation straightforward.
The motor develops a continuous standstill torque of 10.4 Nm, giving the drive enough reserve to hold or slowly move loads without overheating. During operation, the shaft reaches a nominal speed of 4000 rpm, allowing high cycle rates when it is paired with suitable transmission components. A centering diameter of 110 mm aligns the stator face with the machine plate to help keep runout within tolerance. Power, feedback, and brake conductors exit through a side-mounted connector, so electrical connection is made without fixed hardwiring. Rotor position is detected by an integrated multi-turn absolute encoder, and its signals are transmitted as digital servo feedback, so the controller receives absolute position data immediately after power-up.
A blocking brake provides 6.5 Nm of static torque, which helps secure vertical loads when the drive is disabled. The motor has a plain shaft, allowing direct coupling through suitable hubs or shrink-disc connections. A fitted shaft seal helps limit contaminant ingress where light coolant splash or airborne dust is present. This combination supports reliable motor use in mid-power automation axes that require accurate feedback, stable mounting, and secure load holding during stopped conditions.
Frequently Asked Questions about MDD090C-N-040-N2M-110GL1:
Q: What is the continuous standstill torque of the MDD090C-N-040-N2M-110GL1 motor?
A: This motor provides a continuous torque of 10.4 Nm at standstill.
Q: What type of encoder is integrated into the MDD090C-N-040-N2M-110GL1 motor?
A: The MDD090C-N-040-N2M-110GL1 features an integrated multiturn absolute encoder.
Q: What kind of motor feedback does the MDD090C-N-040-N2M-110GL1 use?
A: Digital servo feedback (DSF) is used for motor feedback in this model.
Q: Does the MDD090C-N-040-N2M-110GL1 have a holding brake, and what is its torque?
A: The motor is equipped with a blocking brake that provides a holding torque of 6.5 Nm.
Q: What is the nominal speed of the MDD090C-N-040-N2M-110GL1 synchronous motor?
A: The nominal speed for this motor is rated at 4000 min⁻¹.
