Product Description:

The MDD090C-N-040-N2M-110GL0 is a synchronous servo motor produced by Bosch Rexroth Indramat and supplied within the MDD Synchronous Motors series. As a motor intended for digital drive controllers, it provides rotational power and position control for industrial automation axes such as gantries, packaging spindles, and material-handling stations. The design pairs with drives that close the loop through high-resolution feedback, giving the machine a compact actuator that fits directly into multi-axis cabinets without separate gearing.

At stall, the motor can generate 10.4 Nm of continuous torque, enabling holding force while the drive maintains zero speed. During motion, it reaches a nominal velocity of 4000 rpm, matching applications that demand indexing or rapid traverse. Mechanical alignment is simplified by a 110 mm centering diameter on the front flange, and the smooth plain shaft supports couplings that rely on frictional clamping rather than keys. The motor uses standard housing mass and standard balancing quality, while feedback to the controller is delivered as digital servo feedback so electrical commutation and diagnostics remain precise throughout operation.

The integrated multi-turn absolute encoder reports position over several revolutions, which removes the need for homing after power cycles. Motor size 090 and the C length code set the overall package length, and the left connection direction places power and feedback connectors on the housing side that faces the cable track. There is a shaft seal to limit ingress at the output end, and the shaft follows the standard single-ended format without an extension on side B. Because the motor is delivered without a blocking brake, any static holding requirement must be met by the drive torque or by an external mechanical latch. The connector type is a keyed circular plug, which supports quick cable connection and removal.