Product Description:

The MDD090C-N-040-N2L-130PR0 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Supplied as a motor for digital drive controllers, it converts electrical commands from the drive into precise mechanical motion for automated axes, pick-and-place gantries, and material handling stations. It provides the rotary output needed for closed-loop control of position, velocity, and torque in industrial production lines. This makes the motor suitable for indexing, feed, and transfer duties where motion commands change quickly and the axis must remain stable under changing load.

Its centering flange measures 130 mm, which provides the locating fit between the motor housing and the machine mounting surface and helps keep radial runout low. Power and feedback conductors exit on the right side, so cable routing follows a fixed path. A keyed connector interface keeps the electrical connection compact and avoids hard-wiring. At standstill, the motor can deliver 10.4 Nm of continuous torque, supporting static loads or slow-speed positioning without overheating. The unit is supplied without a blocking brake, so any load-holding function must be provided by the drive or external mechanics. Integrated digital servo feedback (DSF) supplies high-resolution rotor position data, allowing the controller to correct deviations during each control cycle.

The motor has a nominal speed of 4000 rpm, enabling fast indexing while staying within the thermal limits of motor length code C in the standard configuration. Torque is transferred through a keyway shaft, allowing direct coupling to pulleys or gearboxes. The motor also uses a shaft seal, which helps protect against lubricant splash and dust ingress. A single-ended shaft arrangement keeps the drive end dedicated to power transmission. The 090 frame and standard housing finish support installation in common servo-driven machine layouts.