Product Description:

The MDD090C-N-040-N2L-130PL1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and supplied within the MDD Synchronous Motors series. It is designed for use with digital drive controllers in closed-loop motion systems. In automated axes, conveyors, and tooling stations, the motor converts commanded electrical input into controlled rotary motion so speed and torque can be regulated during normal machine operation. This type of motor is commonly used where repeatable acceleration and stable speed control are required under changing loads.

This model reaches a nominal speed of 4000 rpm, allowing production equipment to cycle quickly without overspeeding the mechanical components. At standstill, it can exert a continuous torque of 10.4 Nm, which supports load holding before motion begins. The motor has a centering diameter of 130 mm, which provides the piloting surface used to align the housing with a machine plate or gearbox. It uses standard dynamic balancing and a standard housing for steady operation in general automation equipment. Power and feedback conductors exit on the left side, and the output shaft uses a keyway for positive torque transmission to a coupling or pulley.

A blocking brake rated for 6.5 Nm secures the load when drive power is removed, and the brake is energized through the same rear connection used for the motor phases. Position data is returned through digital servo feedback, allowing the controller to correct motion deviations during operation. The cable interface is a rugged industrial connector, which supports secure attachment of the motor wiring. The shaft includes a shaft seal to limit contaminant entry and reduce lubricant migration along the output end. These features support reliable operation in applications that need controlled stopping, accurate feedback, and protected shaft output.