MDD090C-N-040-N2L-130PB1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD090C-N-040-N2L-130PB1 is a synchronous motor from the MDD Synchronous Motors series. It features a nominal speed of 4000 rpm, with a continuous torque at standstill of 10.4 Nm, and comes equipped with a 6.5 Nm holding brake. This motor includes digital servo feedback, a keyway shaft, and a centering diameter of 130 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD090C-N-040-N2L-130PB1 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it serves as the rotary actuator in closed-loop axes where fast changes in speed and position are required. By converting controlled current from the drive into mechanical motion, the unit provides precise torque for packaging stations, handling gantries, and similar industrial automation equipment. Its synchronous design supports accurate response during indexing, positioning, and other repetitive motion tasks. This makes it suitable for axes that need stable torque delivery through frequent starts, stops, and direction changes.
At a continuous standstill rating of 10.4 Nm, the motor can hold static loads while the control loop remains energized. During motion, its nominal speed reaches 4000 rpm, allowing rapid cycle times with a compatible drive. For holding at rest, the integrated brake provides 6.5 Nm of torque. Power and feedback connections are located on Side B, and a 130 mm pilot diameter helps align the flange to the machine face during mounting. This layout places both interfaces toward the rear of the housing, which can help keep cable runs clear of the driven load. Torque is transmitted through a keyway shaft to reduce the chance of slip during reversing and acceleration.
Position data is delivered through Digital servo feedback, allowing the drive controller to correct error within each control cycle. Electrical connections are made through a molded connector, which keeps installation compact at the motor housing. The overall length is identified by code C, placing this unit within the longer body options of the same frame size. A fitted shaft seal helps limit ingress at the standard single-ended shaft. The motor also uses the standard enclosure style for the 090 frame and standard balancing quality for the rotor and flange. The housing format stays consistent with common MDD mounting geometry for this frame size.
Frequently Asked Questions about MDD090C-N-040-N2L-130PB1:
Q: What is the continuous torque output at standstill for the MDD090C-N-040-N2L-130PB1 motor?
A: The MDD090C-N-040-N2L-130PB1 provides a continuous torque at standstill of 10.4 Nm for reliable performance in drive applications.
Q: Does the MDD090C-N-040-N2L-130PB1 motor include a holding brake, and what is its torque?
A: This motor is equipped with a holding brake that delivers a holding torque of 6.5 Nm.
Q: What type of motor feedback system does the MDD090C-N-040-N2L-130PB1 utilize?
A: The feedback on this model is provided by digital servo feedback (DSF).
Q: What is the nominal speed rating for the MDD090C-N-040-N2L-130PB1 motor?
A: The nominal speed of this motor is rated at 4000 min⁻¹.
Q: What shaft type and protection features are included on the MDD090C-N-040-N2L-130PB1 motor?
A: This motor features a keyway shaft type with a shaft seal for enhanced coupling and protection against contaminants.
