Product Description:

The MDD090C-N-040-N2L-110PL2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Intended for pairing with digital drive controllers, it translates commanded currents into tightly regulated shaft rotation for automated packaging lines, material-handling gantries, and pick-and-place modules. By integrating position transducers within the motor, it supplies instant feedback to the drive so that target profiles are tracked with minimal deviation. This supports compact machine designs that require repeatable velocity and positioning accuracy.

At full rating, the rotor can reach a nominal speed of 4000 rpm, enabling fast indexing while maintaining stable torque production. When held stationary, it can deliver a continuous standstill torque of 10.4 Nm, giving the axis the capacity to resist process loads without overheating. The motor includes a mechanical blocking brake rated at 11.0 Nm, so vertical axes can remain secure after power removal. Accurate flange alignment is aided by a centering diameter of 110 mm, while motion feedback is supplied through digital servo feedback (DSF), permitting high-resolution current loops and dynamic disturbance rejection by the controller.

A balanced rotor with a standard classification helps minimize vibration during operation, and the standard housing suits general-purpose cabinet or machine-frame mounting. Power and feedback leads exit on the left side, and the terminating hardware is a connector that allows straightforward cable attachment. Size code 090 indicates the stator outer diameter, and length code C uses a longer active iron than shorter models. The single-ended shaft carries a hardened keyway and is protected by a fitted shaft seal, which helps keep lubricants in and contaminants out.