MDD090C-N-040-N2L-110PL1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD090C-N-040-N2L-110PL1 is a synchronous motor from the MDD Synchronous Motors series, featuring a nominal speed of 4000 rpm and a centering diameter of 110 mm. It provides 10.4 Nm continuous torque at standstill, is equipped with a keyway shaft and shaft seal, and includes a blocking brake with a holding torque of 6.5 Nm. The motor uses digital servo feedback and has a connector on the left for connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat produced the MDD090C-N-040-N2L-110PL1 for the MDD Synchronous Motors series. The model is a motor for digital drive controllers that delivers closed-loop rotary motion to index tables, pick-and-place axes, and other automated stations. A standard housing and standard rotor balancing support straightforward installation. Its closed-loop operation allows the motor to respond accurately to speed and position commands during repetitive machine cycles. The built-in blocking brake helps hold the axis in place after power is removed.
A centering pilot of 110 mm guides the flange fit, while the rotor can deliver a continuous standstill torque of 10.4 Nm for static holding tasks. During movement, the shaft reaches a nominal speed of 4000 rpm, matching applications that require high commanded speed. Motion feedback is supplied through digital servo feedback, providing position data for closed-loop control. When the blocking brake is engaged, it applies 6.5 Nm of torque to hold the load until drive current returns. This combination of torque, speed, and feedback makes the motor suitable for axes that must start, stop, and hold position with repeatable control. The C motor length adds stack height compared with shorter lengths, and the standard keyway shaft end accepts pulleys or couplings without secondary machining.
Cabling exits from the left side because the power and signal connectors are oriented on that side of the stator frame. The shaft uses a keyway profile, and the motor comes with a shaft seal to limit contamination. The motor has size designation 090, which indicates the stator diameter used in this family. This connector arrangement also keeps cable routing predictable when the motor is installed near guards, slides, or neighboring axes in compact layouts. A standard shaft end on side A only, with no side B stub, reduces the overall envelope depth and helps the motor fit into compact servo packages.
Frequently Asked Questions about MDD090C-N-040-N2L-110PL1:
Q: What is the continuous torque at standstill for the MDD090C-N-040-N2L-110PL1 motor?
A: The MDD090C-N-040-N2L-110PL1 motor delivers a continuous torque of 10.4 Nm at standstill.
Q: Does the MDD090C-N-040-N2L-110PL1 include a brake, and what is its holding brake torque?
A: This model comes equipped with a blocking brake that delivers a holding brake torque of 6.5 Nm.
Q: What type of motor feedback system does the MDD090C-N-040-N2L-110PL1 use?
A: Digital servo feedback (DSF) is used for motor feedback on this model.
Q: What is the nominal speed of the MDD090C-N-040-N2L-110PL1 motor?
A: The nominal speed for the MDD090C-N-040-N2L-110PL1 motor is 4000 min⁻¹.
Q: What kind of shaft does the MDD090C-N-040-N2L-110PL1 motor have?
A: A keyway shaft type is included on the MDD090C-N-040-N2L-110PL1, allowing secure coupling.
