MDD090C-N-030-N2M-130PR1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
27 Seconds
The Bosch Rexroth Indramat MDD090C-N-030-N2M-130PR1 is part of the MDD Synchronous Motors series, designed for use with digital drive controllers. This motor features a nominal speed of 3000 rpm, a continuous torque at standstill of 10.4 Nm, and includes an integrated multiturn absolute encoder. It has a centering diameter of 130 mm and comes with a keyway shaft type and a blocking brake with a holding brake torque of 6.5 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD090C-N-030-N2M-130PR1 belongs to the MDD Synchronous Motors series manufactured by Bosch Rexroth Indramat. Classified as a motor for digital drive controllers, it converts drive-generated current into controlled torque for positioning and speed regulation in industrial automation equipment such as pick-and-place arms and indexing tables. This type of synchronous motor is suited to axes that need repeatable motion and stable torque response during frequent start-stop cycles. Its closed-loop operation allows the connected drive to correct position and speed deviations as load conditions change. The housing and rotor follow the standard construction used for this motor line, providing a familiar mechanical layout for integrated axis designs.
At standstill, the rotor can deliver 10.4 Nm of continuous torque, which supports holding and low-speed duties. Under rated excitation, it reaches a nominal speed of 3000 rpm, which suits medium-speed axes. Accurate spigot location is provided by a 130 mm centering diameter, while dynamic balance remains within the standard grade to help reduce vibration during operation. Cabling exits the housing on the right side, and the blocking brake supplies 6.5 Nm of holding torque when the axis is stopped. This brake helps support suspended or vertical loads when drive current is not used for holding. The keyed shaft transfers power directly to couplings or pulleys.
Power and feedback lines connect through a single connector, so both electrical paths use one plug-in interface. Keeping both connections together can simplify routing in compact machine sections and reduce the number of separate attachment points at the motor. The motor uses size code 090 and length code C, which indicate the frame cross-section and the longer active stack used in this version. Multi-turn position tracking is provided by an integrated absolute encoder, and closed-loop signals are returned as digital servo feedback for direct use by compatible drive controllers. The shaft has a seal to help limit dust and coolant ingress, and the output uses a standard single-sided shaft end.
Frequently Asked Questions about MDD090C-N-030-N2M-130PR1:
Q: What is the continuous torque at standstill for the MDD090C-N-030-N2M-130PR1 motor?
A: The MDD090C-N-030-N2M-130PR1 provides a continuous torque at standstill of 10.4 Nm, supporting demanding motion requirements.
Q: What type of encoder is included in the MDD090C-N-030-N2M-130PR1 motor?
A: This motor uses an integrated multiturn absolute encoder for precise and reliable position feedback.
Q: Does the MDD090C-N-030-N2M-130PR1 motor include a holding brake?
A: A blocking brake is included on this model, offering a holding brake torque of 6.5 Nm for secure stops.
Q: What is the centering diameter of the MDD090C-N-030-N2M-130PR1 motor?
A: The MDD090C-N-030-N2M-130PR1 has a centering diameter of 130 mm for mounting compatibility.
Q: What is the electrical connection direction and type on the MDD090C-N-030-N2M-130PR1 motor?
A: A right-facing connector is provided for easy electrical connection to the MDD090C-N-030-N2M-130PR1 motor.
