Product Description:

The MDD090C-N-030-N2M-130PL2 is a synchronous servo motor from the MDD Synchronous Motors series produced by Bosch Rexroth Indramat. As a motor for digital drive controllers, it converts commanded current into controlled rotation for positioning and speed-regulated motion in automated machinery. This type of motor is commonly used on feed axes, handling systems, and packaging equipment where closed-loop accuracy is required. An integrated multiturn absolute encoder supplies position data directly to the drive, so no separate external feedback device is required.

At standstill, the motor delivers 10.4 Nm of continuous torque, allowing the axis to hold load without thermal overload. Its rated operating speed is 3000 rpm, which suits many industrial servo applications. A blocking brake provides 11.0 Nm of holding torque when power is removed, which is useful on vertical or suspended loads. The centering flange measures 130 mm, which helps keep alignment consistent at the machine interface. Mechanical output is transferred through a keyway shaft for positive coupling engagement. The motor also uses a shaft seal to limit lubricant loss and reduce the entry of splash fluids. Frame size 090 and a shaft on side A support common single-shaft machine layouts.

The Standard balancing grade supports smooth running across the permitted speed range and helps limit vibration during reversals. Service cables enter from the Left, which can simplify routing when motors are arranged along one side of a machine frame. The circular connector carries power, brake, and encoder conductors through one connection point, keeping the cable interface compact. The C length code gives this housing the stator surface area associated with the C-length motor body, supporting duty cycles near the continuous torque limit. A digital servo feedback interface transmits encoder, temperature, and brake signals to the controller.