Product Description:

The Bosch Rexroth Indramat MDD090C-N-030-N2M-130PA1 is a synchronous servo motor in the MDD Synchronous Motors series. Designed for use with digital drive controllers, it supplies regulated torque for coordinated axes in machine tools, packaging systems, and transfer lines. The motor uses size 090 stator laminations and a C-length frame, giving it the proportions associated with this platform. It also uses standard balancing and a standard housing, which supports straightforward mechanical integration in automated equipment. Its synchronous design supports repeatable acceleration, stable speed control, and accurate positioning during cyclic motion.

At standstill, the motor can deliver 10.4 Nm continuously without exceeding permissible winding temperatures. During operation, it reaches a nominal mechanical speed of 3000 rpm, which suits synchronous running with compatible drives. The blocking brake provides 6.5 Nm of holding torque when engaged. Accurate mounting is supported by a 130 mm centering diameter, and torque is transmitted through a keyway shaft so standard couplings can be fitted. A shaft seal is installed at the bearing journal to limit ingress and protect the bearing area during operation.

Closed-loop control relies on digital servo feedback (DSF) together with an integrated multiturn absolute encoder, allowing the drive to read true position over multiple revolutions without external batteries. This feedback arrangement gives the controller immediate position information after power-up and supports stable commutation during motion. Both power and feedback conductors exit on side A. A plug-type connector simplifies cabinet wiring, and the standard motor end bell supports the required connection hardware. The motor has no shaft on side B, which keeps the rear profile shorter where installation depth is limited.