MDD090C-N-030-N2M-130GL1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD090C-N-030-N2M-130GL1 is part of the MDD Synchronous Motors series and is designed for digital drive controllers. It offers a continuous torque at standstill of 10.4 Nm and a nominal speed of 3000 rpm. The motor features a plain shaft with a shaft seal, an integrated multiturn absolute encoder, and a holding brake with a torque of 6.5 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD090C-N-030-N2M-130GL1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat in the MDD Synchronous Motors series. Designed for digital drive controllers, it converts commanded current into rotary motion for axes that require precise velocity and position control in automated production. The size-090 frame and C-length body suit medium-duty installations that run for extended periods. This operating role fits packaging, handling, and assembly axes that need repeatable motion under changing loads. Integrated feedback allows the drive to identify rotor angle immediately after power-up, reducing homing time during frequent start-stop cycles. It is well suited for applications where stable response is needed during acceleration, dwell, and reversing moves.
Mechanical mounting is simplified by a centering diameter of 130 mm, which aligns the front flange without shims. The rotor is balanced to the standard grade, so vibration remains low at the nominal speed of 3000 rpm. With the shaft locked, the motor supplies 10.4 Nm of continuous standstill torque for indexing tables and vertical axes. A blocking brake rated at 6.5 Nm holds position during power loss. That makes the motor suitable for axes that must remain in place when supply power is removed. Position data is sent over digital servo feedback, allowing the drive to receive multiturn angle and temperature data through one hybrid cable. The enclosed housing protects the windings, and a shaft seal helps limit lubricant leakage during extended duty.
Cabling enters from the left side through a keyed connector, allowing quick replacement without rewiring the entire axis. The unit features a plain shaft without a side-B extension. Motion feedback comes from an integrated multiturn absolute encoder that tracks up to 4096 revolutions. The motor follows the N2 winding code, and its DSF interface matches Bosch Rexroth drive controllers. This arrangement supports accurate restart behavior after planned stops or brief power interruptions. The connection layout also helps keep power and feedback routing orderly in compact machine frames.
Frequently Asked Questions about MDD090C-N-030-N2M-130GL1:
Q: What is the continuous torque at standstill for the MDD090C-N-030-N2M-130GL1 motor?
A: The MDD090C-N-030-N2M-130GL1 provides a continuous torque at standstill of 10.4 Nm.
Q: What type of encoder is included on the MDD090C-N-030-N2M-130GL1?
A: This motor features an integrated multiturn absolute encoder for position feedback.
Q: Does the MDD090C-N-030-N2M-130GL1 come with a holding brake?
A: The MDD090C-N-030-N2M-130GL1 is equipped with a blocking brake that provides 6.5 Nm of holding torque.
Q: What kind of motor feedback does the MDD090C-N-030-N2M-130GL1 provide?
A: Motor feedback for this model uses digital servo feedback (DSF).
Q: What is the connection direction and type for the MDD090C-N-030-N2M-130GL1 motor?
A: The connection direction for this motor is left, with a standard connector type.
