Product Description:

The MDD090C-N-030-N2M-130GL0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It interfaces directly with digital drive controllers to provide precise speed and position control on automated conveyors, gantries, and assembly stations, where compact electromechanical actuators must match electronic command cycles. This arrangement supports closed-loop motion tasks that require repeatable acceleration, steady tracking, and accurate positioning during normal machine operation.

At standstill the motor supplies a continuous torque of 10.4 Nm, permitting sustained force output during clamping or indexing without excess heating. During motion it reaches a nominal velocity of 3000 rpm, aligning with standard inverter frequencies used in high-response positioning loops. Installation centers on a flange that carries a 130 mm centering diameter, ensuring coaxial seating between the motor and driven mechanics. Shaft position is monitored by an integrated multiturn absolute encoder, and its rotational data are passed to the drive via digital servo feedback for reference retention after power loss and stable velocity regulation. The housing follows the standard MDD format, the balancing class is standard, and all electrical terminations use a keyed connector.

Power and feedback plugs exit on the left side, allowing cable routing to run parallel along machine frames and reducing interference with adjacent components. Because the motor ships without a blocking brake, systems that need static holding must use an external clamp or drive-applied holding torque when the axis is stopped. The output end uses a plain shaft with a shaft seal to limit grease migration and exclude dust, while side B remains closed. The 090 frame size and C-length stack give the motor moderate inertia for medium-duty pick-and-place axes.