Product Description:

Bosch Rexroth Indramat manufactures the MDD090C-N-030-N2M-110PL0 as part of the MDD Synchronous Motors series. This product is a permanent-magnet AC servo motor engineered for use with digital drive controllers in industrial automation. Within material-handling stations, pick-and-place units, or packaging axes, the motor transforms commanded current into tightly regulated rotary motion. An integrated multiturn absolute encoder supplies position data to the controller, enabling coordinated moves and homing sequences without external sensors. The housing and shaft geometry follow established dimensions for straightforward integration into existing machine layouts.

At stall, the motor can produce 10.4 Nm of continuous torque, letting it hold tables or end-effectors in position against static loads without overheating. During operation, it reaches a rated speed of 3000 rpm, which matches the velocity range of common Indramat drive libraries and supports short cycle times. A centering diameter of 110 mm aligns the flange precisely on the machine casting, reducing radial runout. Position signals travel to the drive over digital servo feedback, eliminating analog drift and enabling high-resolution interpolation. The output shaft uses a keyway, providing a positive mechanical lock with standard pulleys or couplings. A fitted shaft seal blocks coolant spray and dust from migrating along the shaft into the bearing cavity.

The mechanical package is delivered with standard balancing, so vibration stays within ISO limits when the rotor is coupled directly to tooling. Power, feedback, and brake conductors exit through a left-side connection, simplifying cable routing when the motor sits on the right wall of a cabinet or gantry arm. Because the design is without a blocking brake, any holding requirement during power-off must be met by external clamps or the drive's torque-holding capability, reducing overall mass and maintenance points.