Product Description:

The MDD090C-N-030-N2M-110GA0 is a permanent-magnet synchronous motor manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Intended for use with digital drive controllers, it converts precise current commands into repeatable mechanical output for axes that require coordinated motion. By attaching directly to mechanical transmissions or load shafts, it supplies regulated torque and speed for packaging equipment, assembly robots, and material-handling stations. That makes it suitable for automated systems that need repeatable starts, stops, and speed changes throughout the work cycle.

At standstill, it can continuously produce 10.4 Nm of torque, allowing the axis to support static loads without overheating the motor. The rotor is designed for a nominal speed of 3000 rpm, which suits general-purpose positioning tasks and steady operation across a broad working range. A centering pilot of 110 mm helps align the stator flange with adjoining housings during installation. The rotor uses standard balancing to keep vibration low across the usable speed range. The drive side has a plain shaft for coupling to pulleys or other transmission elements. This combination supports compact axis layouts where accurate mechanical alignment is important.

Power and signal plugs face side A, so cabling can be routed along one edge of the machine enclosure. Position data are returned through an integrated multi-turn absolute encoder, and the drive also processes digital servo feedback (DSF) for closed-loop control without external sensors. The feedback arrangement gives the controller continuous rotor position information during startup and normal running. A shaft seal protects the bearing cavity from splashed coolant, and the housing includes a molded connector for a compact electrical interface. Because the motor is supplied without a blocking brake, any holding function must be provided by drive torque or a separate mechanical lock.