Product Description:

The MDD090C-N-030-N2L-A110GB0 is a synchronous servo motor built by Bosch Rexroth Indramat and part of the MDD Synchronous Motors series. Designed for use with digital drive controllers, it delivers controlled mechanical output to automated axes in assembly lines, handling systems, and printing machinery. In these applications, the motor converts commanded current into repeatable rotary motion so the axis can maintain accurate positioning and stable cycle times when load conditions change. Its operating role is to provide responsive motion for equipment that depends on closed-loop speed and position control.

The motor has a nominal speed of 3000 rpm, which is the rated rotational speed during normal operation. It also provides a continuous standstill torque of 10.4 Nm, allowing the axis to hold position without exceeding the thermal limit of the motor. The frame size of 090 sets the mounting dimensions used for installation, while the length code C indicates a longer active motor section for this frame. Position information is returned through digital servo feedback, so the drive receives encoder data for accurate control during acceleration, reversal, and holding operation. This feedback arrangement helps the control loop respond quickly to changing commands and external disturbances.

The motor uses standard balancing, which keeps residual vibration low during normal rotation. It also has a standard housing that uses the usual flange pattern and enclosure form for this motor line. The shaft uses a standard shaft end, giving the motor a straightforward single-ended mechanical output for coupling to the driven load. These features keep the mechanical layout simple and suitable for common servo installations. The housing and shaft arrangement support alignment with typical machine interfaces without adding unnecessary complexity to the drive system.