Product Description:

The MDD090C-N-030-N2L-130PR1 synchronous motor is manufactured by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. Designed for digital drive controllers, it converts regulated DC bus power into precise rotary motion for indexing tables, gantry axes, and material-handling equipment used in automated production lines. Because it is intended for closed-loop motion systems, the motor works with compatible controllers that monitor rotor position continuously and adjust current to match changing loads. This helps the axis maintain repeatable positioning and smooth speed control during frequent starts, stops, and reversals.

The unit supplies a continuous standstill torque of 10.4 Nm, allowing long-duration holding or slow crawl without excess heating. During dynamic duty, it reaches a nominal speed of 3000 rpm, supporting short cycle times when paired with rapid drives. Mechanical centering is facilitated by its 130 mm register. Power and feedback conductors exit on the right side through a sealed connector, which helps keep cable loops clear of moving machine parts and suits tight cabinet layouts. The motor has frame size 090 and length code C, giving it a medium-power envelope for compact machine positions.

An integral blocking brake applies 6.5 Nm of torque to secure vertical loads whenever supply voltage is removed. Rotor position is reported through digital servo feedback, enabling the controller to close position and velocity loops accurately after power-up. The output shaft uses a keyway interface and includes a factory-installed shaft seal, which supports rigid coupling while limiting lubricant migration from connected gear reducers. The motor uses a single-ended shaft arrangement without a side B extension, and the housing follows the standard unpainted series design for enclosure installations with forced-air cabinet cooling.