Product Description:

The MDD090C-N-030-N2L-130PB1 is a synchronous servo motor built by Bosch Rexroth Indramat for use with digital drive controllers in automated machinery. As part of the MDD Synchronous Motors series, it converts electrical power from the drive into controlled mechanical rotation for positioning and motion tasks in packaging lines, transfer stations, and similar equipment. The unit is intended for closed-loop industrial axes where accurate speed regulation and steady torque delivery are required during continuous operation. Its servo design supports controlled motion where repeatability and stable feedback are important to the machine process.

At its rated operating point, the motor reaches a nominal speed of 3000 rpm. While stationary, it can deliver a continuous torque of 10.4 Nm, which helps keep vertical or tensioned loads stable without overheating during normal holding duty. Mounting accuracy is supported by a centering diameter of 130 mm, which helps keep the motor aligned with the machine interface. An integrated blocking brake supplies 6.5 Nm of torque when de-energized, keeping the shaft locked during power-off conditions. Position data are returned to the controller through digital servo feedback, allowing closed-loop speed and position control during operation.

The rotor uses standard balancing, which supports smooth coupling to connected mechanical components. A hardened steel shaft uses a keyway profile and is arranged as a single shaft end on side A. Contaminant ingress is limited by a shaft seal, and cable sets attach through a right-angle connector on side B to simplify routing in compact installations. The motor has a size code of 090 and a length code of C, which determine its overall footprint and thermal mass. The housing uses the standard protection form for the series.