Product Description:

The MDD090C-N-030-N2L-130GA0 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where inverter power is converted into controlled rotary motion. This allows the motor to support positioning and axis drive functions in automated cells, packaging lines, and material-handling equipment. Its operating role is to respond quickly to commanded speed and position changes while maintaining smooth rotation under varying load.

The motor uses a centering diameter of 130 mm so the housing can seat accurately on the mounting surface. Power and feedback leads exit on Side A, and the terminations are made through a single connector that keeps cable routing compact. At standstill, the motor can deliver 10.4 Nm of continuous torque for holding and pressing duties before movement starts. During operation, it reaches a nominal speed of 3000 rpm, which suits common gearbox ratios and supports short indexing cycles. The centering fit also helps keep alignment consistent between the motor and adjacent machine parts. The unit is supplied without a blocking brake, so the shaft must be held by external mechanics or by active drive torque when power is removed.

Feedback to the controller is provided by digital servo feedback (DSF), which supports high-resolution position control and automatic commutation. This arrangement allows the drive to monitor rotor position continuously during acceleration, steady running, and stopping. The output uses a plain shaft that can be matched with suitable couplings, and the shaft end is fitted with a shaft seal to help limit dust and coolant ingress. The rotor is balanced to a standard grade, and the motor uses size 090 with length code C for its housing proportions. The housing profile supports air circulation when the motor is mounted on machine frames or inside enclosed cabinets, and the single-ended shaft layout leaves no secondary output on side B.