Product Description:

The MDD090C-N-030-N2L-110PR2 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Built for use with digital drive controllers, it converts commanded current into tightly regulated torque and speed for automated presses, pick-and-place arms, and transfer stations. This allows the motor to hold position accurately and follow programmed velocity profiles during repeated machine cycles. Its compact housing supports installation in equipment where precise motion must be maintained without unnecessary bulk.

At standstill, the motor supplies a continuous torque of 10.4 Nm, allowing the axis to support load without excessive heating. Under rated excitation, it reaches a nominal speed of 3000 rpm, which suits common servo applications that need fast and stable rotation. When power is removed, an integrated blocking brake provides up to 11.0 Nm of holding torque so vertically oriented mechanisms can remain stationary. Rotor position is reported through digital servo feedback, allowing accurate closed-loop motion control. Mechanical centering is provided by a flange pilot of 110 mm, which helps align the motor with the machine interface. The C length code indicates the body depth used for this version, and the sealed housing helps protect internal parts from contamination. A single circular connector carries both power and feedback connections, and standard dynamic balancing helps reduce vibration during operation.

All electrical and feedback connections exit on the right side of the stator, which helps keep cable routing orderly in drag-chain layouts. Torque is transferred through a keyway shaft, and contamination ingress is limited by an integrated shaft seal. The motor uses only a drive-end shaft extension, so there is no side B stub extending from the opposite end. With a frame designation of 090, the unit fits the mechanical envelope used for this size class. This layout supports compact machine arrangements while keeping the non-drive end clear.