MDD090C-N-020-N2M-130GL0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
59 Seconds
The Bosch Rexroth Indramat MDD090C-N-020-N2M-130GL0 motor is part of the MDD Synchronous Motors series and is designed for digital drive controllers. It features a continuous torque at standstill of 10.4 Nm and has a nominal speed of 2000 rpm. This motor includes an integrated multiturn absolute encoder and digital servo feedback, with a centering diameter of 130 mm and a plain shaft with shaft seal.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD090C-N-020-N2M-130GL0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It pairs with digital drive controllers to provide closed-loop positioning and velocity control in automated assembly cells, handling equipment, and packaging modules. The frame uses size 090 and length code C, giving a compact envelope for mid-power axes. This motor type is suited for axes that need repeatable acceleration, stable speed regulation, and compact installation dimensions in machinery with limited mounting space. A standard housing and standard dynamic balancing simplify mounting, and its design for digital drive controllers supports coordinated multi-axis operation on a shared bus platform.
The motor reaches a nominal speed of 2000 rpm, allowing moderate-speed motion profiles while keeping torque ripple low. At standstill, it can produce a continuous torque of 10.4 Nm, so static holding or slow feed movements remain servo-stiff without extra cooling. Precise mechanical alignment is supported by a centering diameter of 130 mm, which mates directly with standard machine flanges. That fit helps maintain shaft alignment with couplings or gear inputs and reduces installation error during assembly. Power and feedback conductors exit on the left side through a rugged connector, reducing cable stress in cabinets arranged with right-hand service aisles. This cable exit orientation can simplify routing when adjacent modules occupy the opposite side of the cabinet. The shaft end uses the standard single-ended configuration, which helps reduce overall machine depth.
An integrated feedback package combines digital servo feedback with an integrated multiturn absolute encoder, so position data is retained across power cycles without homing routines. The feedback system gives the drive immediate rotor position data at startup, which supports accurate synchronization after a power interruption. A plain shaft carries the drive load, and a shaft seal helps block coolant or lubricants from migrating along the journal into the stator cavity. The motor is supplied without a blocking brake, so applications that require power-off holding must use external clamps or maintain drive torque. Standard balancing keeps vibration within ISO limits during 1:1 coupling.
Frequently Asked Questions about MDD090C-N-020-N2M-130GL0:
Q: Does the MDD090C-N-020-N2M-130GL0 motor come with a holding brake?
A: This model does not include a blocking brake.
Q: What type of encoder is included in the MDD090C-N-020-N2M-130GL0 motor?
A: The encoder is an integrated multiturn absolute encoder for precise position detection.
Q: What is the continuous torque at standstill provided by the MDD090C-N-020-N2M-130GL0?
A: The continuous torque at standstill for this model is 10.4 Nm.
Q: What motor feedback system is used on the MDD090C-N-020-N2M-130GL0?
A: This motor uses digital servo feedback (DSF) for motor feedback.
Q: What kind of shaft and sealing does the MDD090C-N-020-N2M-130GL0 motor use?
A: The shaft is a plain shaft with a shaft seal, providing a standard mechanical connection with protection against contaminants.
