MDD090C-N-020-N2L-110GL0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
48 Seconds
The Bosch Rexroth Indramat MDD090C-N-020-N2L-110GL0 is part of the MDD Synchronous Motors series and is intended for digital drive controllers. This motor features a nominal speed of 2000 min⁻¹, a continuous torque at standstill of 10.4 Nm, and uses digital servo feedback. It is equipped with a plain shaft and a 110 mm centering diameter, with a standard housing and shaft seal.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD090C-N-020-N2L-110GL0 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed for digital drive controllers, it converts commanded current into controlled rotary motion for industrial axes. The 090 frame size and C length give the motor a compact footprint, while the standard housing and balancing support installation in general automation equipment. This layout suits positioning and feed applications where accurate motion, stable response, and dependable integration with closed-loop drive systems are required.
Its continuous standstill torque is 10.4 Nm, which provides stable load support during holding and low-speed operation. When driven by a matched inverter, the rotor reaches a nominal speed of 2000 rpm, making it suitable for medium-speed positioning and feed tasks. Accurate centering during assembly comes from the 110 mm pilot diameter. Power, encoder, and brake conductors exit on the left side through a sealed connector, which supports orderly cable routing along the machine bed. Rotor angle is reported to the controller by the integrated digital servo feedback, allowing high-resolution commutation and precise closed-loop control. A cylindrical plain shaft transmits torque through a friction-fit connection, which keeps the shaft profile simple and supports direct coupling arrangements.
The motor is supplied without a blocking brake, so any load that must remain fixed after power removal needs an external holding method. A lip-type shaft seal helps protect the front bearing area against coolant and similar contamination. The stator uses the C length code, which gives the motor a moderate overall length for its frame size. The enclosure follows the standard casting used across the family, and the rotor is balanced to the manufacturer’s standard grade for regular industrial duty. A side-B shaft is not included, which helps keep the overall motor length shorter and leaves more room for surrounding machine components.
Frequently Asked Questions about MDD090C-N-020-N2L-110GL0:
Q: What is the connection direction for the MDD090C-N-020-N2L-110GL0 motor?
A: The MDD090C-N-020-N2L-110GL0 features a left-facing electrical connector for power and signal connections.
Q: What is the continuous torque at standstill for this motor?
A: This model provides a continuous torque of 10.4 Nm at standstill, suitable for steady load applications.
Q: What type of motor feedback does this model use?
A: The MDD090C-N-020-N2L-110GL0 uses digital servo feedback (DSF) for motor feedback.
Q: Is the MDD090C-N-020-N2L-110GL0 equipped with a holding brake?
A: This motor does not include a blocking brake, offering unbraked operation when unpowered.
Q: What kind of shaft end and sealing does the MDD090C-N-020-N2L-110GL0 feature?
A: The shaft end is plain and comes with a shaft seal to help protect against dust and moisture.
