MDD090B-N-030-N2M-130GA0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
5 Seconds
The Bosch Rexroth Indramat MDD090B-N-030-N2M-130GA0 is a motor for digital drive controllers from the MDD Synchronous Motors series. It features a nominal speed of 3000 rpm and delivers a continuous torque at standstill of 7.2 Nm. This model includes an integrated multiturn absolute encoder and digital servo feedback, and comes with a plain shaft and a centering diameter of 130 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD090B-N-030-N2M-130GA0 is a synchronous servo motor built by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. It is intended for use with digital drive controllers where precise, closed-loop position and velocity control are required in automation lines, pick-and-place modules, material-handling axes, and other coordinated servo applications. Its synchronous design supports accurate response to changing command signals from the connected drive. The motor belongs to the product type "motor for digital drive controllers," uses a standard housing with standard rotor balancing, and is supplied without a blocking brake, so external methods must secure the load when power is off.
This unit can deliver a continuous stall torque of 7.2 Nm, allowing the axis to hold or move moderate loads without overheating at rated current. Under nominal electrical frequency, the rotor reaches 3000 rpm, supporting fast duty cycles when paired with a compatible inverter. Mechanical alignment is aided by a centering diameter of 130 mm, which fits directly into matching machine frames for repeatable coaxial mounting. Power and feedback leads exit on side A, minimizing cable runs in cabinets that mount the motor with its flange facing the operator. All terminations are made through a single industrial connector, which keeps wiring compact and supports sealed cable entry in enclosed machine layouts.
Motion feedback is processed through Digital servo feedback (DSF), and an integrated multi-turn absolute encoder resolves position over multiple revolutions without battery backup. A plain shaft is used, so torque is transferred with clamp or shrink couplings instead of keys, and contamination is limited by a factory-installed shaft seal. The shaft end is standard and is present only on the drive side, conserving space on side B for tight mechanical envelopes. Motor length code B and size 090 indicate the overall form factor and keep this model consistent with other MDD frames for mounting layout and inertia class.
Frequently Asked Questions about MDD090B-N-030-N2M-130GA0:
Q: What is the continuous standstill torque provided by the MDD090B-N-030-N2M-130GA0 motor?
A: The MDD090B-N-030-N2M-130GA0 delivers a continuous torque of 7.2 Nm at standstill.
Q: What type of encoder is built into the MDD090B-N-030-N2M-130GA0 motor?
A: This model features an integrated multiturn absolute encoder for precise position tracking.
Q: How is the shaft configured on the MDD090B-N-030-N2M-130GA0 motor?
A: The shaft end on this motor is a standard plain shaft and does not include a side B shaft end.
Q: Where is the electrical connection located on the MDD090B-N-030-N2M-130GA0 motor?
A: The connection for this motor is a connector located on Side A.
Q: Does the MDD090B-N-030-N2M-130GA0 motor include a holding brake?
A: The MDD090B-N-030-N2M-130GA0 is manufactured without a holding brake.
