MDD090B-N-030-N2M-110PB0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911255015
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
22 Seconds
The Bosch Rexroth Indramat MDD090B-N-030-N2M-110PB0 is a motor for digital drive controllers and is part of the MDD Synchronous Motors series. It has a continuous torque at standstill of 7.2 Nm, a nominal speed of 3000 rpm, and features an integrated multiturn absolute encoder. The motor uses digital servo feedback and is equipped with a keyway shaft and a shaft seal.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD090B-N-030-N2M-110PB0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and supplied within the MDD Synchronous Motors series. Intended for use with digital drive controllers, the unit converts regulated armature current into rotary torque for positioning tables, feed screws, and automated handling modules. Its construction matches the mechanical envelope expected in modular machine frames, allowing the motor to be integrated into existing Rexroth servo axes without modification. By providing closed-loop velocity and position control, it links programmable logic instructions to physical motion in industrial automation cells.
The mechanical interface follows a centering diameter of 110 mm, which aligns the stator housing concentrically with attached gearboxes or mounting flanges. Electrical and signal conductors leave the housing on side B through a single connector, which simplifies cable routing when the motor is mounted lengthwise. Under continuous stall conditions, the motor delivers 7.2 Nm of torque, and it sustains synchronous operation up to 3000 rpm when the drive applies its rated frequency. Angular feedback is returned over digital servo feedback (DSF), providing high-resolution position data for the controller while standard dynamic balancing limits vibration during high-speed reversal.
Position accuracy is refined further by the integrated multiturn absolute encoder, which records shaft revolutions even when power is removed. A front shaft seal protects the bearing section against coolant splash or airborne particles, and torque is transmitted through a keyway shaft. Because the motor is supplied without a blocking brake, holding force must be provided by the drive or an external clamp during stationary periods. The motor has a standard housing, size 090 with length code B, a connector-based wiring interface, and a single shaft end.
Frequently Asked Questions about MDD090B-N-030-N2M-110PB0:
Q: What is the continuous torque at standstill for the MDD090B-N-030-N2M-110PB0 motor?
A: The MDD090B-N-030-N2M-110PB0 motor provides a continuous torque at standstill of 7.2 Nm.
Q: What type of encoder is integrated into the MDD090B-N-030-N2M-110PB0 motor?
A: This model has an integrated multiturn absolute encoder for precise position tracking.
Q: What kind of shaft and seal configuration does the MDD090B-N-030-N2M-110PB0 motor feature?
A: A keyway shaft is provided, with a shaft seal for additional protection.
Q: What is the connection direction and type for the MDD090B-N-030-N2M-110PB0 motor?
A: The electrical connection is via a connector positioned on Side B of the motor.
Q: Is the MDD090B-N-030-N2M-110PB0 motor equipped with a holding brake?
A: This motor does not come equipped with a holding brake.
