MDD090B-N-030-N2M-110PA2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
47 Seconds
The Bosch Rexroth Indramat MDD090B-N-030-N2M-110PA2 is a motor from the MDD Synchronous Motors series designed for digital drive controllers. It features a centering diameter of 110 mm, a nominal speed of 3000 rpm, and a continuous torque at standstill of 7.2 Nm. The motor also has an integrated multiturn absolute encoder, a holding brake with 11 Nm torque, and a standard housing with a keyway shaft type.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD090B-N-030-N2M-110PA2 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It works with digital drive controllers to convert commanded current into controlled rotary motion for positioning, conveying, and indexing tasks in automated machinery. An integrated multiturn absolute encoder returns position data to the drive so closed-loop control can be maintained without external transducers. Because the encoder is built into the motor, the drive can monitor actual rotor position directly instead of relying on a separate sensing device. That supports consistent response during starts, stops, and reversals in packaging equipment, transfer systems, and other repeat-motion applications.
The motor has a centering diameter of 110 mm, which provides an accurate locating reference for face mounting on machine plates or gearboxes. Power and feedback connections are routed through a plug-in connector on side A, which keeps cabling consolidated at one end of the housing. At standstill, the unit delivers 7.2 Nm of continuous torque for steady holding duty while energized. During operation, it can reach 3000 rpm for high-cycle motion profiles. A built-in brake supplies 11.0 Nm of holding torque so the shaft can remain fixed when power is removed. This combination supports both dynamic motion and secure load retention in axes that pause frequently between moves.
The controller communicates through digital servo feedback, allowing position and operating data to be exchanged in real time during motion. Torque is transmitted through a keyway shaft, and a shaft seal helps keep lubricant in place while limiting the entry of dust or coolant spray. Frame size 090 places the motor in a medium-power housing format, while the B length provides a mid-range stack length within the series. The motor also uses standard balancing, a standard housing, and a single-ended shaft for common conveyor, gantry, and material-handling layouts. The single-ended shaft layout leaves the opposite end free of additional output hardware, which can simplify coupling placement in compact machine sections.
Frequently Asked Questions about MDD090B-N-030-N2M-110PA2:
Q: What is the nominal speed of the MDD090B-N-030-N2M-110PA2 synchronous motor?
A: The MDD090B-N-030-N2M-110PA2 operates at a nominal speed of 3000 min⁻¹, supporting efficient motion cycles.
Q: What type of encoder is included on the MDD090B-N-030-N2M-110PA2 motor?
A: This model is equipped with an integrated multiturn absolute encoder for precise feedback and positioning.
Q: What shaft type and sealing does the MDD090B-N-030-N2M-110PA2 have?
A: The MDD090B-N-030-N2M-110PA2 features a keyway shaft with a shaft seal for secure coupling and added protection.
Q: Does the MDD090B-N-030-N2M-110PA2 motor have a holding brake, and what is its torque rating?
A: A blocking brake with a holding torque of 11.0 Nm is included for safety and positional retention.
Q: What kind of motor feedback system does the MDD090B-N-030-N2M-110PA2 use?
A: This model employs digital servo feedback (DSF) for reliable and accurate motor control.
